OLYMPIQUE Facade Access Consulting Blog

Outrigger v. Davit system: Who Reigns Supreme?

Written by facadeaccess | Apr 9, 2018 11:07:45 PM

There are many ways to access the exterior of a building. You can use an extension ladder, high reach extension poles, or a boom lift (cherry picker), but these are only used for structures that are under four stories. When working with buildings taller than four stories you will have to use something that is more appropriate. As a building owner, you have several options; two common options are an Outrigger system and a Davit system. There are pros and cons for either system. A significant factor will be the city and/or state regulatory codes and standards because they will impact the decision. We compare the two systems here to explain their features and settle the long-running debate (we didn't just make it up for this article).

 

Outrigger System

An Outrigger System is a low-profile one or two beam system that uses two points of contact to steady itself on the roof of a building. The back end of the outrigger can be tied down to an approved roof anchorage point or come equipped with a counterweight to resist the overturning force from the suspended work platform. In most cases, this system is used as a temporary solution to allow for building access during construction. It can also be installed as a permanent solution to obtain access to your building’s facade. In both cases, outrigger systems require “ground rigging,” which means the suspended work platform must start at the ground level.

See Also: Living Facades: What are They and How to Maintain Them

Pros:

  • Easy to set up
  • Either permanent or temporary
  • Low-profile along a rooftop
  • Cost-effective

 

Cons:

  • Can only be “ground rigged”
  • Slower building maintenance times
  • Time lost due to breakdown and moving of the Outrigger System during work
  • Requires significant open roof area to set up which may compete with MEP equipment, solar panels or amenity roofs
  • Prohibited for use in scheduled routine maintenance in certain jurisdictions

 

Davit System

The Davit System is a permanent installation of davit pedestals at the roof level that serves as anchor points for the portable equipment (sockets, davit arms, etc.), which are used to suspend a work platform at each drop location. These davit arms can be moved from location to location quickly and are installed on a finished building, as to allow for the proper anchoring of the system to the roof. Davit systems do have a high profile option that, unlike the Outrigger system, allows for “roof rigging” in which the workers can enter the suspended work platform at the roof level. When not in use, the portable davit arms can be laid down and stored out of sight.

 

Pros:

  • Easy to move from location to location
  • Permanent anchor points along the roof allow for predetermined drop locations
  • Can be “roof rigged”
  • Ease of access allows for work to be done faster
  • Can be folded away from roofline for a clean look post work

 

Cons:

  • More expensive
  • Higher visibility than the Outrigger system, during use

 

Local codes and standards in the building’s city or state will dictate available system options; in most cases, either will work. The differences between these two systems may be hard to visualize if we’re honest. Lucky for you, we know which is best for each particular situation. Our experts have been consulting on facade access for decades.

 

If you have questions about which system to use, please call us at 949-309-2820 or contact us. Being in business since 1989, we bring facade access expertise and are ready to answer any of your questions.